honeybee_openstudio.hvac.standards package

Subpackages

• honeybee_openstudio.hvac.standards.data package
  • Module contents

Submodules

• honeybee_openstudio.hvac.standards.air_conditioner_variable_refrigerant_flow module
  • create_air_conditioner_variable_refrigerant_flow()
• honeybee_openstudio.hvac.standards.boiler_hot_water module
  • create_boiler_hot_water()
• honeybee_openstudio.hvac.standards.central_air_source_heat_pump module
  • create_central_air_source_heat_pump()
• honeybee_openstudio.hvac.standards.coil_cooling module
  • create_coil_cooling_dx_single_speed()
  • create_coil_cooling_dx_two_speed()
  • create_coil_cooling_water()
  • create_coil_cooling_water_to_air_heat_pump_equation_fit()
• honeybee_openstudio.hvac.standards.coil_heating module
  • create_coil_heating_dx_single_speed()
  • create_coil_heating_electric()
  • create_coil_heating_gas()
  • create_coil_heating_water()
  • create_coil_heating_water_to_air_heat_pump_equation_fit()
• honeybee_openstudio.hvac.standards.cooling_tower module
  • prototype_apply_condenser_water_temperatures()
  • prototype_condenser_water_temperatures()
• honeybee_openstudio.hvac.standards.fan module
  • create_fan_by_name()
  • create_fan_constant_volume_from_json()
  • create_fan_on_off_from_json()
  • create_fan_variable_volume_from_json()
  • create_fan_zone_exhaust_from_json()
  • fan_baseline_impeller_efficiency()
  • fan_change_impeller_efficiency()
  • is_small_fan()
• honeybee_openstudio.hvac.standards.heat_recovery module
  • create_hx_air_to_air_sensible_and_latent()
• honeybee_openstudio.hvac.standards.hvac_systems module
  • model_add_baseboard()
  • model_add_central_air_source_heat_pump()
  • model_add_chw_loop()
  • model_add_cw_loop()
  • model_add_district_ambient_loop()
  • model_add_doas()
  • model_add_doas_cold_supply()
  • model_add_evap_cooler()
  • model_add_four_pipe_fan_coil()
  • model_add_furnace_central_ac()
  • model_add_ground_hx_loop()
  • model_add_high_temp_radiant()
  • model_add_hp_loop()
  • model_add_hvac_system()
  • model_add_hw_loop()
  • model_add_low_temp_radiant()
  • model_add_minisplit_hp()
  • model_add_plant_supply_water_temperature_control()
  • model_add_psz_ac()
  • model_add_psz_vav()
  • model_add_ptac()
  • model_add_pthp()
  • model_add_pvav()
  • model_add_pvav_pfp_boxes()
  • model_add_residential_erv()
  • model_add_residential_ventilator()
  • model_add_unitheater()
  • model_add_vav_pfp_boxes()
  • model_add_vav_reheat()
  • model_add_vrf()
  • model_add_vsd_twr_fan_curve()
  • model_add_water_source_hp()
  • model_add_waterside_economizer()
  • model_add_window_ac()
  • model_add_zone_erv()
  • model_add_zone_heat_cool_request_count_program()
  • model_get_or_add_ambient_water_loop()
  • model_get_or_add_chilled_water_loop()
  • model_get_or_add_ground_hx_loop()
  • model_get_or_add_heat_pump_loop()
  • model_get_or_add_hot_water_loop()
  • standard_design_sizing_temperatures()
• honeybee_openstudio.hvac.standards.plant_loop module
  • chw_sizing_control()
  • plant_loop_set_chw_pri_sec_configuration()
• honeybee_openstudio.hvac.standards.pump_variable_speed module
  • pump_variable_speed_set_control_type()
• honeybee_openstudio.hvac.standards.radiant_system_controls module
  • model_add_radiant_basic_controls()
  • model_add_radiant_proportional_controls()
• honeybee_openstudio.hvac.standards.schedule module
  • create_constant_schedule_ruleset()
  • create_schedule_type_limits()
  • model_add_schedule()
• honeybee_openstudio.hvac.standards.sizing_system module
  • adjust_sizing_system()
• honeybee_openstudio.hvac.standards.thermal_zone module
  • thermal_zone_get_occupancy_schedule()
  • thermal_zone_get_outdoor_airflow_rate()
  • thermal_zone_get_outdoor_airflow_rate_per_area()
• honeybee_openstudio.hvac.standards.utilities module
  • convert_curve_biquadratic()
  • create_curve_biquadratic()
  • create_curve_quadratic()
  • eer_to_cop_no_fan()
  • ems_friendly_name()
  • hspf_to_cop_no_fan()
  • kw_per_ton_to_cop()
  • rename_air_loop_nodes()
  • rename_plant_loop_nodes()

Module contents

Sub-package containing a Python version of the OpenStudio-standards prototype module.

https://github.com/NREL/openstudio-standards/tree/master/lib/openstudio-standards/prototypes/common/objects